Color inserts are available with all ladder racks to match or accent your vehicle or company colors. There are 66 different colors available.
The most versatile and safest cargo fastening devices available. They have only one loose end which hooks to the underside of the crossmember. Gold zinc plated steel with 4' or 6' straps.
6" tall for protection from ladders, 3/4" center hole, 3 oblong holes 120° apart for strobe mounting bolts. Aluminum.
Side strobe mounts don’t take away cross-member space and can be used on both contractor and utility rigs. Made from .100” 5052 aluminum.
Protect your valuable ladders form theft. This is the heaviest cable lock Master Lock® makes. It has a 3/8” vinyl coated cable which comes in 4’ or 6’ (A362). Keyed alike or keyed different. Priced below retail.
Provides near effortless loading, unloading, and fastening of a single ladder. Ladder rolls forward to front hold-down and is clamped in rear with one motion. Typical ladder lengths are 24' and 28'.
Handle is 11” long and made of hard rubber coated steel. Used with Folding Foot Steps to gain access to vehicle roof area. Supplied with mounting bolts
Bolts to truck body for better roof access. Stainless steel step folds up and stays up when not in use.
A high quality cast aluminum door and end cap for 4" or 6" PVC pipe (pipe not supplied) with 1/4" x 1" mounting bands. Can be mounted above or below crossmember.
A handy hook for small coils of rope or cord. Also has an anchor for holding the hook end of a ratchet tie-down strap when rack is empty. 1/4" x 1" aluminum.
Sets up in seconds, insures wire unspools correctly and allows multiple wires to be pulled off simultaneously. (1" pipe not supplied.) Stainless steel.
Used with 2" x 6" lumber (not supplied), they install in seconds to create an additional level for materials and help keep cargo area organized. Stainless steel.
Made to hold cord and keep 5 gal. buckets in place, this stainless steel hook can be clipped into the Pick-Up Trak anywhere along its length.
This is a commonly requested item, so we added it. It increases clearance under the box to make previously unusable space usable. 3" x 3" x 1/8" aluminum.
This hanger bolts into the heavy T-slot in the upper gusset and into the side of a top-side (shown) or low-side tool box, eliminating the need for legs. 1/4" x 1" aluminum.
A heavy duty hook for hose, wire, etc., it bolts to the underside of the extension beam flange, facing inward. Drilling is required. 1/4" x 2" aluminum.
A very heavy duty hook for hose, cord, and chain, it bolts to the inside T-slot of the crossmember. 1/4" x 2" aluminum.
A heavy hook which can hold 200 feet of air hose or 400 feet of extension cord when opposing each other. Can also be mounted vertically in truss leg or in Pick-Up Trak. 1/4" x 2" aluminum.
Used when ladders or lumber exceed the height of the extension beam. 13" tall, it mounts anywhere on the horizontal flange of the extension beam. Drilling is required. 1/4" x 2" aluminum.
For step ladders and short or flexible material. Horizontally milled slots allow adjustable front-to-rear positioning of crossmember. Includes Ladder Life rubber anti-wear insert strip. Aluminum.
The cab window guard mounts to the inside T-Slot of the truss legs and protects the rear window and cab from equipment and cargo. All Aluminum construction.
Ladder Side Stops are used as guides for ladders, lumber, pipes, etc. The Ladder Side Stop/Anchor version includes a hole for tying off ropes, etc. 1/4" x 1" aluminum.